Steris Amsco Century SV-1264 Prevac Steam Sterilizer
120V electrical requirement to power display
480V electrical requirement to run pumps
Machine was power tested to display ONLY….machine was not industrially tested (pumps were not powered on, water/steam lines were not hooked up) so power to the display is the only thing
Item was previously built into the wall and was hard-wired in…machine will need to be re-wired
Very clean inside chamber! Comes with Steris Amsco Loading Cart
Manufactured in 2006, installed in 2007
Item is sold as-is without any warranty. Local pickup from our warehouse with dock access (zip: 80020)
Dalmec PFC Industrial Manipulator
Manufactured in 2008 – Counter at 1,298
Max load: 55lbs
Pressure: 0.60 Mpa
Great physical condition! Came from Pfizer plant that closed down — very well taken care of!!
Floor-mounted base included — bolts needed to secure base to floor and manipulator to base
Some assembly of manipulator may be required
Base height: 80″
Glass cover of one pressure gauge on the booster regulator is missing
Cylinder lock is missing on box
These manipulators costs tens of thousands of dollars…save thousands purchasing a high quality machine from us!
Pictures are part of description. Item is sold without warranty. Please contact us with any questions BEFORE purchasing or making an offer
Item will ship as freight due to size/weight. Buyer is responsible for coordinating and paying for all freight charges. Item can be picked up from our warehouse with dock access (zip: 80020). We can palletize the item for $45 or we can crate the item for safer travel for $100.
Structural Concepts CDR4859A Hot Stone Pizza Station
Brand new and never installed!! Ability to be branded in any way that you would like!
Multiple models available…
Glass and kickplates are included (on top of table in pictures)
Dimensions (approx.) – 103″ x 46″ x 36″
These came from a large chain grocery store and could be outfitted in your new store or restaurant! SAVE THOUSANDS PURCHASING FROM US!!!!!
Pictures are part of description. Item can be picked up from our warehouse with dock access (zip: 80020)
Item can be locally picked up or freight shipped!
WOW!! These lockers are in Excellent Condition!
We have 2 sizes available and multiple sets in each size. They are priced at $50 per column
3 Column Lockers 54″ x 18″ x 72″ $150 per set
4 Column Lockers 72″ x 18″ x 72″ $200 per set
Brand New Zero Zone Reach in Freezer
This Freezer was purchased at auction. It was purchased to be placed in a local grocery store, but never used. Please check out any specs online at Zero Zone
Please email with questions. Sold as Shown. Additional Hardware and items as shown in photos.
Buyer to arrange their own shipping. Local Pickup Available.
Sold As Is As Shown.
Additional items may need to be purchased to complete installation and use. Any additional hardware needed will be at the cost to the buyer. Only the items shown will be included in this sale.
ArjoHuntleigh Freedom Bath
Electronic Tambour Door
It is in very good physical condition, some scratches/scuffs from moving the bath
Came from state hospital
Comes with one side panel (the remaining side will need to be flush against the wall — we don’t have the attachments for the panel)
Bath will need to be re-wired with a new 120V plug
This bed was purchased new for $13,550! Save thousands buying from us!
Pictures are part of description. Item is sold as-is only. Ask us any questions or for more pictures!
Item will ship as freight. Buyer is responsible for coordinating and paying for freight! We charge $75 for palletizing or $100 for crating and preparing item for shipment. We will send final weight/dimensions and the buyer can coordinate pickup from our warehouse with dock access.
We also have two more different model ArjoHuntleigh baths available…check out our eBay store!
Lift integration for residents/patients needing assistance.
Unique electric roll door, which retracts into the base of the bath during entry and exit, providing simple access for residents/patients.
Durable inflatable seal.
Flexible drain and plumbing connections for easy installation.
Very good immersion for high bathing comfort.
Rigid support handle.
Can be installed in standard dimension bathing alcoves or as a free-standing bath.
Touchpad operation with lock-out function to prevent unauthorised use.
Emergency release of roll door for greater safety.
Measurements, volumes and weights
1510 mm (59 1/2″)
760 mm (30″)
1210 mm (47 5/8″)
505-540 mm (20-21 1/4″)
232lbs – 225 L (59 gal (US))
Max total weight
550 kg (1213 lbs)
Drain flow rate
130 L/min (34 gal (US)/min)
Drain flow rate with water trap
110 L/min (29 gal (US)/min)
120 V single phase AC
max 800 VA
Cold/hot water connections, inlets and outlets
Operating dynamic pressure
100-600 kPa (15-87 psi)
Rec. dynamic pressure
200-300 kPa (29-43.5 psi)
Max HW 80°C (176°F) Min HW 38°C (100°F) Max CW 25°C (77°F)
HW 38-65°C (100-149°F) CW 10-18°C (50-64°F)
Recommended water flow
(CW + HW) 25+25 L/min (6.6+6.6 gal (US)/min)
100 L/min (26.4 gal (US)/min)
Amsco Reliance 444 washer. 208 V, 3 phase, 4 wire. 120V, 60 Hz. for controller and display.
• 26 x 26 x 26 inch chamber
• removable rack with three shelves
• three rotary water jets above shelves and one beneath
• dual pump speeds for gentle or vigorous action
• front powered vertical door with tinted, tempered glass
• door interlock during operation
• six preprogrammed adjustable cycles and four custom programmable cycles
• automatic detergent injection
• each cycle consists of pre-wash, wash, rinse and thermal rinse
• stage 3 controller with vacuum fluorescent display, report printer, buttons for programming, cycle menu, cycle select, cycle start, stop and extend, alarm response, power door open and close
• printer door is missing bottom screw and no thermal paper is included
Overall dimensions of the unit:
• width: 42 in.
• depth: 32
• height: 80
Shipping weight is about 1075 pounds. Item will ship as freight. Buyer is responsible for coordinating and paying for all freight charges. We charge $60 for palletizing item or $115 if you would like us to crate the item. Item will be shipped from our warehouse (zip code: 80020) with dock access
Item is sold as-is without warranty or returns. Item was power tested only (not industrially tested) and hooked up to air to lift door.
Gyros Gyrolab Workstation
The Gyrolab workstation is a high-throughput all-in-one research tool that can process microfluidic samples all on one proprietary sample disk. The Gyrolab reduces the amount of manual handling and potential risk of human error associated with hands-on testing. The results are reproducible with SOPs that are maintained within Gyrolab software.Condition Description
The Gyrolab is in good cosmetic condition with signs of benchtop wear, and two scuff marks on the side This instrument was originally installed in a private US physical health and medicine business in 2008.
Power cables and computer connection cables are included with this machine, as well as, some tubing.
Manufacturer: Gyros Protein Technologies
Model: Gyrolab Workstation
Serial Number: GW10071
Functionality: Tested for power only!
Dimensions: 48″ x 24″ x 32″
Power Requirements: 100-240 VAC, 50/60Hz, 1.5-3.5A
Application: Microfluidic Immunoassay
This item is sold as-is, without warranty or returns.
Pictures are part of description. Please ask questions before purchasing or sending an offer
Item will ship as freight due to weight.
Buyer is responsible for coordinating and paying for all freight charges.
Buyer can coordinate freight pickup from our warehouse with dock access (zip code:80020)
We can palletize the item for the buyer for an additional $60 or crate the item for an additional $110
Flexstar Technology Enclosed Server
Unknown model or specifications.
Power tested only! Machines booted up and displayed message: “No more network devices” and “Connection timed out” (monitor NOT included)
Nice enclosure from Flexstar Technology (rolling cart underneath NOT included!) Double-sided locking doors (keys included), metal exterior
Machine is sold as-is only! No returns or warranty included
Approximate Dimensions: 32″ x 21″ x 13″ Approximate Weight: 120lbs
Item will have to ship as freight due to weight!! We will palletize the item for an additional $60. Item will be shipped as freight from our warehouse (zip code 80020) with dock access.
Buyer is responsible for coordinating and paying for all freight charges!